Dell Latitude 7310 How-To Install & Replace Your LCD Display Assembly


In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Latitude 7310 laptop. These installation instructions have been made into 5 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7310 LCD Display Assembly.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Latitude 7310 Screen

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7310 Screen

Video tutorial repair manual



Installation and Removal Instructions
Latitude 7310 LCD Display Assembly

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the Bottom Base Cover (8 x captive screws).

Step 2

  • Unscrew the Bottom Base Cover (8 x captive screws).
  • Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Unscrew the Bottom Base Cover (8 x captive screws).Use a plastic scribe to pry apart and remove the Bottom Base Cover.Unscrew the Bottom Base Cover (8 x captive screws).Unscrew the Bottom Base Cover (8 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Disconnect the battery cable.Disconnect the battery cable.
Unscrew and remove the LCD bracket (2 x M2 x 2mm).

Step 4

  • Unscrew and remove the LCD bracket (2 x M2 x 2mm).
  • Disconnect the LCD cables.
Unscrew and remove the LCD bracket (2 x M2 x 2mm).Disconnect the LCD cables.Unscrew and remove the LCD bracket (2 x M2 x 2mm).Unscrew and remove the LCD bracket (2 x M2 x 2mm).
Unscrew the left and right LCD hinges (4 x 2.5mm x 4mm).

Step 5

  • Unscrew the left and right LCD hinges (4 x 2.5mm x 4mm).
  • Open the LCD Display Assembly and separate it from the Palmrest Assembly.
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew the left and right LCD hinges (4 x 2.5mm x 4mm).Open the LCD Display Assembly and separate it from the ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew the left and right LCD hinges (4 x 2.5mm x 4mm).

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals LCD Display Assembly Latitude 7310

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.