In this Dell laptop tutorial we are going to show you how to install and replace the I/O Circuit Board on your Inspiron 16 Plus 7630 laptop. These installation instructions have been made into 7 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Inspiron 16 Plus 7630 I/O Circuit Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 16 Plus 7630 I/O Circuit Board
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- Unscrew the Bottom Base Cover (7 x M2 x 3mm) (2 x captive screws).
- Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the Battery.
Step 4
- Unclip the locking tab and disconnect the (1st) I/O board cable.
Step 5
- Unclip the locking tab and disconnect the (2nd) I/O board cable.
Step 6
- Unclip the locking tab and disconnect the (3rd) I/O board cable.
Step 7
- Unscrew and remove the I/O Circuit Board (2 x M2 x 3mm).
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|