Dell G16 7630 How-To Install & Replace Your LCD Display Assembly

By on September 30, 2024 · 9:16 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your G16 7630 laptop. These installation instructions have been made into 6 easy to follow printable steps. We have also created a video tutorial that shows you how to install your G16 7630 LCD Display Assembly.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
G16 7630 Screen

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G16 7630 Screen

Video tutorial repair manual



Installation and Removal Instructions
G16 7630 LCD Display Assembly

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).

Step 2

  • Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).
  • Use a plastic scribe to separate and remove the Bottom Base Cover.
Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).Use a plastic scribe to separate and remove the Bottom Base Cover.Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Unscrew and remove the Rear Cover (4 x

Step 4

Unscrew and remove the Rear Cover (4 x Unscrew and remove the Rear Cover (4 x Unscrew and remove the Rear Cover (4 x
Peel away the adhesive cover.

Step 5

  • Peel away the adhesive cover.
  • Unclip the locking tab and disconnect the LCD cable.
  • Disconnect the Dynamic Display Switch (DDS) cable.
Peel away the adhesive cover.Unclip the locking tab and disconnect the LCD cable.Disconnect the Dynamic Display Switch (DDS) cable.Peel away the adhesive cover.
Unscrew and separate the LCD Display Assembly from the palmrest (8 x 2.5mm x 4.5mm).

Step 6

  • Unscrew and separate the LCD Display Assembly from the palmrest (8 x 2.5mm x 4.5mm).
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and separate the LCD Display Assembly from the palmrest (8 x 2.5mm x 4.5mm).***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and separate the LCD Display Assembly from the palmrest (8 x 2.5mm x 4.5mm).Unscrew and separate the LCD Display Assembly from the palmrest (8 x 2.5mm x 4.5mm).
G16 7630 Screen

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G16 7630 Screen

Topics: Dell G Series Repair Manuals Dell Laptop Repair Dell Repair Manuals G16 (7630) LCD Display Assembly

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.