Dell G16 7630 How-To Install & Replace Your Power Button

By on October 1, 2024 · 2:04 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Power Button on your G16 7630 laptop. These installation instructions have been made into 16 easy to follow printable steps. We have also created a video tutorial that shows you how to install your G16 7630 Power Button.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
G16 7630 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G16 7630 Power Button

Video tutorial repair manual



Installation and Removal Instructions
G16 7630 Power Button

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).

Step 2

  • Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).
  • Use a plastic scribe to separate and remove the Bottom Base Cover.
Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).Use a plastic scribe to separate and remove the Bottom Base Cover.Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).Unscrew the bottom base cover (6 x M2 x 5mm) (4 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Unscrew and remove the Battery (4 x

Step 4

Unscrew and remove the Battery (4 x Unscrew and remove the Battery (4 x
Unscrew and slide out the bracket and 2230 NVMe SSD. (2 x

Step 5

Unscrew and slide out the bracket and 2230 NVMe SSD. (2 x Unscrew and slide out the bracket and 2230 NVMe SSD. (2 x
Unscrew and slide out the bracket and 2280 NVMe SSD. (2 x

Step 6

Unscrew and slide out the bracket and 2280 NVMe SSD. (2 x Unscrew and slide out the bracket and 2280 NVMe SSD. (2 x
Unscrew and remove the antenna bracket (1 x M2 x 4mm).

Step 7

Unscrew and remove the antenna bracket (1 x M2 x 4mm).Disconnect the antenna cables.Slide out the Wireless/WiFi Card.Unscrew and remove the antenna bracket (1 x M2 x 4mm).
Unscrew and remove the Rear Cover (4 x

Step 8

Unscrew and remove the Rear Cover (4 x Unscrew and remove the Rear Cover (4 x Unscrew and remove the Rear Cover (4 x
Disconnect the DC Jack.

Step 9

  • Disconnect the DC Jack.
Disconnect the speaker cable.

Step 10

  • Disconnect the speaker cable.
Disconnect the left and right Cooling Fans.

Step 11

  • Disconnect the left and right Cooling Fans.
Disconnect the left and right Cooling Fans.Disconnect the left and right Cooling Fans.
Unclip the locking tab and then disconnect the USB cable.

Step 12

  • Unclip the locking tab and then disconnect the USB cable.
Unclip the locking tab and then disconnect the USB cable.Unclip the locking tab and then disconnect the USB cable.
Peel away the adhesive cover.

Step 13

  • Peel away the adhesive cover.
  • Unclip the locking tab and disconnect the LCD cable.
  • Disconnect the Dynamic Display Switch (DDS) cable.
Peel away the adhesive cover.Unclip the locking tab and disconnect the LCD cable.Disconnect the Dynamic Display Switch (DDS) cable.Peel away the adhesive cover.
Unclip the locking tab and disconnect the touchpad cable.

Step 14

  • Unclip the locking tab and disconnect the touchpad cable.
  • Unclip the locking tab and disconnect the keyboard cable.
Unclip the locking tab and disconnect the touchpad cable.Unclip the locking tab and disconnect the keyboard cable.Unclip the locking tab and disconnect the touchpad cable.Unclip the locking tab and disconnect the touchpad cable.
Unscrew the Motherboard, USB Circuit Board, and Ethernet Board and then over the Motherboard (7 x

Step 15

Unscrew the Motherboard, USB Circuit Board, and Ethernet Board and then over the Motherboard (7 x Unscrew the Motherboard, USB Circuit Board, and Ethernet Board and then over the Motherboard (7 x Unscrew the Motherboard, USB Circuit Board, and Ethernet Board and then over the Motherboard (7 x
Unscrew and remove the Power Button (4 x M2 x 2mm wafer).

Step 16

  • Unscrew and remove the Power Button (4 x M2 x 2mm wafer).
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and remove the Power Button (4 x M2 x 2mm wafer).***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the Power Button (4 x M2 x 2mm wafer).Unscrew and remove the Power Button (4 x M2 x 2mm wafer).
G16 7630 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G16 7630 Power Button

Topics: Dell G Series Repair Manuals Dell Laptop Repair Dell Repair Manuals G16 (7630) Power Button

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.