In this Dell laptop tutorial we are going to show you how to install and replace the LCD Hinges on your Inspiron 15 (3520) laptop. These installation instructions have been made into 11 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Inspiron 15 (3520) LCD Hinges.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
Inspiron 3520 Hinges
Inspiron 15 3520 LCD Hinges
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 (3520) LCD Hinges
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- Unscrew the bottom base cover (6 x M2 x 5mm) (2 x captive screws).
- Use a plastic scribe to separate and remove the Bottom Base Cover.
Step 3
- Disconnect the battery cable.
Step 4
- Unscrew and remove the WiFi bracket (1 x 2mm x 3.5mm).
- Disconnect and loosen the antenna cables.
Step 5
- Unsnap the locking tab and disconnect the LCD cable .
Step 6
- Unscrew and lift the left LCD hinge (2 x M2.5 x 5mm).
- Unscrew and lift the right LCD hinge (2 x M2.5 x 5mm).
Step 7
- Separate the LCD Display Assembly from the palmrest.
Step 11
- Unscrew and remove the Right LCD Hinge (3 x 2.5mm x 3.8mm).
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Inspiron 3520 Hinges
Inspiron 15 3520 LCD Hinges
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|