In this Dell laptop tutorial we are going to show you how to install and replace the I/O Circuit Board on your Dell G3 15 (3500) laptop. These installation instructions have been made into 6 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Dell G3 15 (3500) I/O Circuit Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small Phillips #0 screwdriver
- 1 x small plastic scribe
G3 3500 I O Circuit Board
G3 15 3500 I O Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell G3 15 (3500) I/O Circuit Board
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a Plastic Scribe.
- Unscrew the bottom base cover (6 X 2mm x 7mm) (4 X captive screws).
- Pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the Battery Cable.
Step 5
- Unsnap the locking tab and disconnect the I/O board cable.
Step 6
- Unscrew and remove the I/O Circuit Board (2 x M2 x 3mm).
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
G3 3500 I O Circuit Board
G3 15 3500 I O Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|