In this Dell laptop tutorial we are going to show you how to install and replace the Keyboard Controller Board on your Alienware x17 R2 laptop. These installation instructions have been made into 7 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Alienware x17 R2 Keyboard Controller Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small Phillips #0 screwdriver
- 1 x small Phillips #00 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Alienware x17 R2 Keyboard Controller Board
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a Plastic Scribe.
- Unscrew the bottom base cover (2 X 2.5mm x 9mm) (4 X captive screws) (2 x M2.5 x 5mm).
- Pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the Battery Cable.
Step 5
- Unclip the locking tab and disconnect the touchpad cable.
- Unclip the locking tab and disconnect the keyboard cable.
Step 6
- Unclip the locking tab and disconnect the keyboard controller cable.
- Unclip the locking tab and disconnect the keyboard backlight cable.
Step 7
- Unscrew and remove the Keyboard Controller Board (2 X 1.6mm x 1.7mm).
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|