Dell Alienware x17 R2 How-To Install & Replace Your Power Button

By on December 18, 2024 · 11:40 am
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Power Button on your Alienware x17 R2 laptop. These installation instructions have been made into 18 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Alienware x17 R2 Power Button.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small Phillips #0 screwdriver
  • 1 x small Phillips #00 screwdriver
  • 1 x small plastic scribe
Alienware x17 R2 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Alienware x17 R2 Power Button

Video tutorial repair manual



Installation and Removal Instructions
Alienware x17 R2 Power Button

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a

Step 2

TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a Unscrew the bottom base cover (2 X 2.5mm x 9mm) (4 X captive screws) (2 x M2.5 x 5mm).Pry apart and remove the Bottom Base Cover.TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a
Disconnect the Battery Cable.

Step 3

  • Disconnect the Battery Cable.
Disconnect the DC Jack cable.

Step 4

  • Disconnect the DC Jack cable.
Unclip the locking tab and disconnect the left and right LED cables.

Step 5

  • Unclip the locking tab and disconnect the left and right LED cables.
Unclip the locking tab and disconnect the left and right LED cables.Unclip the locking tab and disconnect the left and right LED cables.Unclip the locking tab and disconnect the left and right LED cables.Unclip the locking tab and disconnect the left and right LED cables.
Unscrew the rear I/O cover (2 x M2.5 x 5mm).

Step 6

Unscrew the rear I/O cover (2 x M2.5 x 5mm).Slide off the Rear I/O Cover.
Unscrew and remove the DC jack bracket (1 x M2 x 3mm) (2 x

Step 7

Unscrew and remove the DC jack bracket (1 x M2 x 3mm) (2 x Remove the DC Jack.Unscrew and remove the DC jack bracket (1 x M2 x 3mm) (2 x
Disconnect the audio cable.

Step 8

  • Disconnect the audio cable.
  • Disconnect the I/O board cable.
Disconnect the audio cable.Disconnect the I/O board cable.
Unclip the locking tab and disconnect the power button cable.

Step 9

  • Unclip the locking tab and disconnect the power button cable.
Unclip the locking tab and disconnect the power button cable.Unclip the locking tab and disconnect the power button cable.
Remove the audio port.

Step 10

  • Remove the audio port.
Remove the audio port.Remove the audio port.
Disconnect the left cooling fan.

Step 11

Disconnect the left cooling fan.Unscrew and remove the Left Cooling Fan (2 x Disconnect the left cooling fan.
Disconnect the right cooling fan.

Step 12

Disconnect the right cooling fan.Unscrew and remove the Right Cooling Fan (3 x Disconnect the right cooling fan.
Unscrew and remove the WiFi antenna bracket.

Step 13

  • Unscrew and remove the WiFi antenna bracket.
  • Disconnect the antenna cables.
Unscrew and remove the WiFi antenna bracket.Disconnect the antenna cables.
Disconnect the speaker cable.

Step 14

  • Disconnect the speaker cable.
  • Unclip the locking tab and disconnect the keyboard controller cable.
Disconnect the speaker cable.Unclip the locking tab and disconnect the keyboard controller cable.Disconnect the speaker cable.
Peel back the adhesive cover.

Step 15

  • Peel back the adhesive cover.
  • Unclip the locking tab and disconnect the display cable.
Peel back the adhesive cover.Unclip the locking tab and disconnect the display cable.Peel back the adhesive cover.
Unscrew and remove the heat pipe (3 x M2 x 3mm) (2 x

Step 16

Unscrew and remove the heat pipe (3 x M2 x 3mm) (2 x Unscrew and remove the heat pipe (3 x M2 x 3mm) (2 x
Unscrew and remove the Motherboard (4 x

Step 17

Unscrew and remove the Motherboard (4 x Unscrew and remove the Motherboard (4 x
Unscrew and remove the power button cover (3 X 1.6mm x 2mm).

Step 18

  • Unscrew and remove the power button cover (3 X 1.6mm x 2mm).
  • Remove the Power Button.
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and remove the power button cover (3 X 1.6mm x 2mm).Remove the Power Button.***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the power button cover (3 X 1.6mm x 2mm).
Alienware x17 R2 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Alienware x17 R2 Power Button

Topics: Dell Alienware Repair Manuals Dell Laptop Repair Dell Repair Manuals Alienware x17 R2 Power Button

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.