In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Alienware x17 R2 laptop. These installation instructions have been made into 10 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Alienware x17 R2 LCD Display Assembly.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small Phillips #0 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Alienware x17 R2 LCD Display Assembly
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a Plastic Scribe.
- Unscrew the bottom base cover (2 X 2.5mm x 9mm) (4 X captive screws) (2 x M2.5 x 5mm).
- Pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the Battery Cable.
Step 4
- Disconnect the DC Jack cable.
Step 5
- Unclip the locking tab and disconnect the left and right LED cables.
Step 6
- Peel back the adhesive covering.
- Unclip the locking tab and disconnect the camera cable.
Step 8
- Peel back the adhesive cover.
- Unclip the locking tab and disconnect the display cable.
Step 9
- Unscrew the left and right LCD hinges from the bottom side (4 x M2.5 x 5mm).
- Unscrew the left and right LCD hinges from the top side (4 x M2.5 x 5mm).
Step 10
- Remove the LCD Display Assembly.
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|