Dell G15 (5530) How-To Install & Replace Your Power Button

By on January 9, 2025 · 4:47 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Power Button on your Dell G15 (5530) laptop. These installation instructions have been made into 18 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Dell G15 (5530) Power Button.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small Phillips #0 screwdriver
  • 1 x small plastic scribe
G15 5530 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G15 5530 Power Button

Video tutorial repair manual



Installation and Removal Instructions
Dell G15 (5530) Power Button

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a

Step 2

TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a Unscrew the bottom base cover (6 x M2 x 5mm) (4 X captive screws).Pry apart and remove the Bottom Base.TOOLS FOR THIS REPAIR: Phillips #0 Screwdriver and a
Disconnect the Battery Cable.

Step 3

  • Disconnect the Battery Cable.
Unscrew and remove the Battery (4 x

Step 4

Unscrew and remove the Battery (4 x Unscrew and remove the Battery (4 x
Unscrew and remove the antenna bracket (1 x M2 x 4mm).

Step 5

  • Unscrew and remove the antenna bracket (1 x M2 x 4mm).
  • Disconnect the antenna cables.
  • Slide out the WiFi Card.
Unscrew and remove the antenna bracket (1 x M2 x 4mm).Disconnect the antenna cables.Slide out the WiFi Card.
Unscrew and remove the thermal bracket from SSD slot 1 (2 x M2 x 4mm).

Step 6

Unscrew and remove the thermal bracket from SSD slot 1 (2 x M2 x 4mm).Slide out the M.2 NVMe SSD.Unscrew and remove the thermal bracket from SSD slot 1 (2 x M2 x 4mm).
Unscrew and remove the thermal bracket from SSD slot 2 (2 x M2 x 4mm).

Step 7

Unscrew and remove the thermal bracket from SSD slot 2 (2 x M2 x 4mm).Slide out the M.2 NVMe SSD.Unscrew and remove the thermal bracket from SSD slot 2 (2 x M2 x 4mm).
Unscrew and remove the Rear Cover (4 x M2 x 5mm) (2 x

Step 8

Unscrew and remove the Rear Cover (4 x M2 x 5mm) (2 x Unscrew and remove the Rear Cover (4 x M2 x 5mm) (2 x Unscrew and remove the Rear Cover (4 x M2 x 5mm) (2 x
Peel back the adhesive covering the LCD cable connector.

Step 9

  • Peel back the adhesive covering the LCD cable connector.
  • Unclip the locking tab and then disconnect the LCD cables.
Peel back the adhesive covering the LCD cable connector.Unclip the locking tab and then disconnect the LCD cables.Peel back the adhesive covering the LCD cable connector.Peel back the adhesive covering the LCD cable connector.
Disconnect the DC Jack cable.

Step 10

  • Disconnect the DC Jack cable.
  • Unscrew and remove the DC Jack (2 x M2 x 5mm).
Disconnect the DC Jack cable.Unscrew and remove the DC Jack (2 x Disconnect the DC Jack cable.
Unclip the locking tab and then disconnect the keyboard cable.

Step 11

  • Unclip the locking tab and then disconnect the keyboard cable.
Unclip the locking tab and then disconnect the keyboard cable.Unclip the locking tab and then disconnect the keyboard cable.
If you have a single-color keyboard, unclip the locking tab and then disconnect the backlight cable.

Step 12

  • If you have a single-color keyboard, unclip the locking tab and then disconnect the backlight cable.
  • OR, if you have a four-color keyboard, unclip the locking tab and then disconnect the keyboard controller cable.
If you have a single-color keyboard, unclip the locking tab and then disconnect the backlight cable.OR, if you have a four-color keyboard, unclip the locking tab and then disconnect the keyboard controller cable.If you have a single-color keyboard, unclip the locking tab and then disconnect the backlight cable.If you have a single-color keyboard, unclip the locking tab and then disconnect the backlight cable.
Unclip the locking tab and then disconnect the touchpad cable.

Step 13

  • Unclip the locking tab and then disconnect the touchpad cable.
Unclip the locking tab and then disconnect the touchpad cable.Unclip the locking tab and then disconnect the touchpad cable.
Unscrew and remove the type-C USB bracket (2 x M2 x 5mm).

Step 14

  • Unscrew and remove the type-C USB bracket (2 x M2 x 5mm).
Unscrew and remove the type-C USB bracket (2 x M2 x 5mm).Unscrew and remove the type-C USB bracket (2 x M2 x 5mm).
Disconnect the speaker cable.

Step 15

  • Disconnect the speaker cable.
Unscrew and remove the Motherboard (5 x

Step 16

Unscrew and remove the Motherboard (5 x Unscrew and remove the Motherboard (5 x
Unscrew and remove the power button bracket (2 x M2 x 2mm wafer).

Step 17

Unscrew and remove the power button bracket (2 x M2 x 2mm wafer).Unscrew and remove the power button bracket (2 x M2 x 2mm wafer).
Unscrew and remove the Power Button (1 x

Step 18

Unscrew and remove the Power Button (1 x ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the Power Button (1 x
G15 5530 Power Button

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
G15 5530 Power Button

Topics: Dell G Series Repair Manuals Dell Laptop Repair Dell Repair Manuals G15 (5530) Power Button

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.