Dell XPS 16 (9640) How-To Install & Replace Your Speakers

By on February 6, 2025 · 8:53 am
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Speakers on your XPS 16 (9640) laptop. These installation instructions have been made into 19 easy to follow printable steps. We have also created a video tutorial that shows you how to install your XPS 16 (9640) Speakers.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x T5 Torx screwdriver
  • 1 x small plastic scribe
XPS 16 9640 Speakers

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 16 9640 Speakers


Installation and Removal Instructions
XPS 16 (9640) Speakers

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap and/or an ESD mat to help prevent this.

Step 2

  • CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap and/or an ESD mat to help prevent this.
CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap and/or an ESD mat to help prevent this.CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap and/or an ESD mat to help prevent this.
TOOLS FOR THIS REPAIR: Phillips #0 & T5 Torx Screwdrivers and a

Step 3

TOOLS FOR THIS REPAIR: Phillips #0 & T5 Torx Screwdrivers and a Unscrew the Bottom Base Cover (8 x M2 x 3mm).Pry apart and remove the Bottom Base Cover.TOOLS FOR THIS REPAIR: Phillips #0 & T5 Torx Screwdrivers and a
Disconnect the battery cable.

Step 4

  • Disconnect the battery cable.
Disconnect the battery cable.Disconnect the battery cable.
Unscrew and remove the Battery (6 X 2mm x 4.5mm).

Step 5

  • Unscrew and remove the Battery (6 X 2mm x 4.5mm).
Unscrew and remove the Battery (6 X 2mm x 4.5mm).Unscrew and remove the Battery (6 X 2mm x 4.5mm).
Unscrew the GPU Cooling Fan (3 X 2mm x 4.5mm).

Step 6

  • Unscrew the GPU Cooling Fan (3 X 2mm x 4.5mm).
  • Unsnap the locking tab and disconnect the GPU Cooling Fan.
Unscrew the GPU Cooling Fan (3 X 2mm x 4.5mm).Unsnap the locking tab and disconnect the GPU Cooling Fan.Unscrew the GPU Cooling Fan (3 X 2mm x 4.5mm).
Unscrew the CPU Cooling Fan (3 X 2mm x 4.5mm).

Step 7

  • Unscrew the CPU Cooling Fan (3 X 2mm x 4.5mm).
  • Unsnap the locking tab and disconnect the CPU Cooling Fan.
Unscrew the CPU Cooling Fan (3 X 2mm x 4.5mm).Unsnap the locking tab and disconnect the CPU Cooling Fan.Unscrew the CPU Cooling Fan (3 X 2mm x 4.5mm).
Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).

Step 8

  • Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).
Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).Unscrew and disconnect the LCD bracket and cables (2 X 1.4mm x 1.3mm) (2 x M2 x 3mm).
Unscrew and remove the Heatsink. Follow the numbered sequence as shown.

Step 9

  • Unscrew and remove the Heatsink. Follow the numbered sequence as shown.
  • -INTEGRATED GRAPHICS HEATSINK (4 X Captive Screws)
  • -DISCRETE GRAPHICS HEATSINK (6 X Captive Screws).
Unscrew and remove the Heatsink. Follow the numbered sequence as shown.-INTEGRATED GRAPHICS HEATSINK (4 X Captive Screws)-DISCRETE GRAPHICS HEATSINK (6 X Captive Screws).
Unscrew and remove the WiFi bracket (1 x M2 x 3mm).

Step 10

  • Unscrew and remove the WiFi bracket (1 x M2 x 3mm).
  • Disconnect the antenna cables.
Unscrew and remove the WiFi bracket (1 x M2 x 3mm).Disconnect the antenna cables.Unscrew and remove the WiFi bracket (1 x M2 x 3mm).
Unclip the locking tab and then disconnect the power button cable.

Step 11

  • Unclip the locking tab and then disconnect the power button cable.
Unclip the locking tab and then disconnect the power button cable.Unclip the locking tab and then disconnect the power button cable.
Disconnect the left and right speaker cables.

Step 12

  • Disconnect the left and right speaker cables.
Disconnect the left and right speaker cables.Disconnect the left and right speaker cables.
Unclip the locking tab and then disconnect the touch panel cable.

Step 13

  • Unclip the locking tab and then disconnect the touch panel cable.
Unclip the locking tab and then disconnect the touch panel cable.Unclip the locking tab and then disconnect the touch panel cable.
Unclip the locking tab and then disconnect the touchpad cable.

Step 14

  • Unclip the locking tab and then disconnect the touchpad cable.
Unclip the locking tab and then disconnect the touchpad cable.Unclip the locking tab and then disconnect the touchpad cable.
Unclip the locking tab and then disconnect the keyboard controller cable.

Step 15

  • Unclip the locking tab and then disconnect the keyboard controller cable.
Unclip the locking tab and then disconnect the keyboard controller cable.Unclip the locking tab and then disconnect the keyboard controller cable.
Unscrew and remove the Motherboard.

Step 16

  • Unscrew and remove the Motherboard.
Unscrew and remove the Motherboard.Unscrew and remove the Motherboard.
Lift the left and right speakers from the palmrest assembly.

Step 17

  • Lift the left and right speakers from the palmrest assembly.
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Lift the left and right speakers from the palmrest assembly.***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the processors and heatsink.

Step 18

  • BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the processors and heatsink.
  • ***NOTE: Make sure to not touch the heat transfer areas on the heatsink and processors. The oils on your skin can reduce the heat transfer capability of the thermal paste.
BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the processors and heatsink.***NOTE: Make sure to not touch the heat transfer areas on the heatsink and processors. The oils on your skin can reduce the heat transfer capability of the thermal paste.BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the processors and heatsink.
Apply a small amount of new thermal paste to the processors.

Step 19

  • Apply a small amount of new thermal paste to the processors.
  • Replace the heatsink.
Apply a small amount of new thermal paste to the processors.Replace the heatsink.Apply a small amount of new thermal paste to the processors.Apply a small amount of new thermal paste to the processors.
XPS 16 9640 Speakers

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 16 9640 Speakers

Topics: Dell XPS Repair Manuals Dell Laptop Repair Dell Repair Manuals Speakers XPS 16 (9640)

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.