In this Dell laptop tutorial we are going to show you how to install and replace the DC Jack Charging Port on your Inspiron 15 (5510) laptop. These installation instructions have been made into 7 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Inspiron 15 (5510) DC Jack Charging Port.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 (5510) DC Jack Charging Port


Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.


Step 2
- CAUTION: Electrostatic Discharge (ESD) is the build up of static electricity on a person's body. This can cause serious damage to your laptop. You can use an ESD wrist strap or an ESD mat to help prevent this.
![]() ![]() ![]() ![]() |


Step 3
- TOOLS FOR THIS REPAIR: Phillips #0 and a Plastic Scribe.
- Unscrew the Bottom Base Cover (2 X captive screws) (7 x M2 x 4mm).
- Pry apart and remove the Bottom Base Cover.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |


Step 6
- Peel back the adhesive covering the DC jack cable connector.
- Disconnect the DC Jack.
![]() ![]() ![]() ![]() |
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|